Author Topic: Thin clients No Longer recognized by ADM  (Read 2986 times)

Offline alamedaclcTopic starter

  • Newbie
  • *
  • Posts: 1
Thin clients No Longer recognized by ADM
« on: April 01, 2013, 01:37:50 PM »

I have a bunch of t50 thin clients. Recently, I was trying to push configuration changes through ADM and I discovered that it appears the clients are no longer communicating properly. Whenever I push and update, it says failed. When I check for new firmware using Atrust manager on the clients, I get a connection failure as well. Is there anything I can do to troubleshoot this issue?

Offline Chris Polley

  • Administrator
  • Newbie
  • *****
  • Posts: 19
    • ByteSpeed LLC
Re: Thin clients No Longer recognized by ADM
« Reply #1 on: April 01, 2013, 02:07:27 PM »

Do you currently have the clients setup with static or dynamic addresses?  We have noticed that if they are setup with static addresses that there are connection issues with the ADM.  It is also possible that the dynamic addresses changed on the clients and the ADM may need to go out and rescan for the new addresses.
If you still need assistance, please contact our helpdesk at 888-658-0715.

-=Chris Polley=-
ByteSpeed… Partners for Education
Toll Free: 888-658-0715