Author Topic: Removing hard drive from Z583 Chassis  (Read 1246 times)

Offline lhulneTopic starter

  • Administrator
  • Newbie
  • *****
  • Posts: 27
    • ByteSpeed
Removing hard drive from Z583 Chassis
« on: October 10, 2012, 08:07:21 AM »
1) remove the side panel with the air vent by taking out the 2 screws, releasing the clips, and pulling the panel back.
2) remove the two screws holding the hard drive in, the hard drive will slide out top first
3) remove the red data cable and the multi-wire power cable

Reverse order if you have a new hard drive to install. Refer to the 2 pictures.


https://skydrive.live.com/redir?resid=7D4624BDC348C08B!741
https://skydrive.live.com/redir?resid=7D4624BDC348C08B!742
Lucas Hulne
Production Manager
ByteSpeed LLC
Toll Free: 888-658-0715
Fax: 218-227-0498
www.bytespeed.com

 

tech-project-offer