Author Topic: All-in-One 770 Motherboard Replacement(H110T)  (Read 556 times)

Offline dmathisonTopic starter

  • ByteSpeed Technician
  • Newbie
  • ***
  • Posts: 6
All-in-One 770 Motherboard Replacement(H110T)
« on: February 17, 2017, 04:48:59 PM »
To remove the motherboard from the 770 chassis, first remove the bottom 2 screws pictured here.

With those screws removed you can slide the back cover up and pull it off. The next thing you will want to remove will be the CPU heatsink. The screws you need to loosen are circled below. Once you loosen the screws you should be able to just lift the heatsink up and out.

After the heatsink is removed, you will need to disconnect all the cables connected to the board. Those are circled in the picture below.

Now that all the cables are disconnected, remove the 4 screws holding the motherboard to the chassis. Those are circled in the picture below.

Now that everything is removed you should be able to lift the motherboard up and out of the chassis. Reverse these steps to put the new motherboard in.
If you have any questions or concerns please contact Bytespeed at, call in at 877-553-0777,  or join our live chat at
Please make sure your Bytespeed serial number is ready. (example: 2017-01-1234)

Thank you, and I hope this helps!